Questions & Answers for: Brother dust

Question about DCP-7020 All-In-One Laser Printer

1 Answer

Dust on Drum message after installinng new Drum Since I had been getting "Toner Low" messages when the display told me to "Replace the Drum." Fortunately, I had a new drum on hand. Therefore, I put a ...

Ad

Question about IntelliFax-2820 Laser Fax

2 Answers

"Dust on Drum" problem Always give me the error message "Dust on Drum" even I clean the drum as instructed in the maual, change the toner and put on a new drum. What can go wrong. I get the message ...

Ad

Question about HL 1440 Laser Printer

2 Answers

Brother MFC 7420,SAYS DUST ON DRUM,TRIED TO CLEAN BUT NO JOY Dust on drum is an issue with the corona wire. Use the blue tab on top of the drum unit. Slide it back and forth 10+ times and this should ...

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...thing happens over and over again.... Any advice? are your bobbins wound tight? allso do you have dust caught in the bobbin case at the bottom of your machine?make sure and clean out all bits of ...

Question about IntelliFax-2820 Laser Fax

1 Answer

How to get rid of the ''Dust on Drum'' I know how to get rid of the replace drum problem but how do you get rid of the dust on drum? It will not print anything. The dust on the drum message will ...

Question about MFC-8460N All-In-One Printer

2 Answers

Dust on drum check corona wire, slide the blue tab 10 times check both side of drum if there is an toner on the surface of the drum try to clean it with metal polish and a cotton cloth There will be ...

Question about MFC-8460N All-In-One Printer

1 Answer

dust on drum What does the drum look like? An where is it situated on the fax machine, how do I clean the dust off. Open the front of the machine.The drum is part of the toner cartridge. Turn the ...

Question about IntelliFax-2820 Laser Fax

2 Answers

Dust on the drum message - fax 2820 brother I got a message to clean the corona wire of the drum ( dust on the drum). Where it is and how to clean it up.Thanks,Samir There is a blue colored slider on ...

Question about MFC-7820N Printer

2 Answers

Brother says "Dust on Drum" wont print, and when does the page has two black lines down the middle Yes some of dust have your printer drum unite.Open drum and clean it then solve your problem. I have ...

Question about HL 2140 Laser Printer

1 Answer

...do you get rid of error light with no obvious paper jam on HL2140 the eror is probably caused by dust or paper slivers somewhere or a open door or the paper trat not being in right. Open

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment and Supply Experts

Norman Weimar
Norman Weimar

Level 3 Expert

7035 Answers

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...