...tray after the dump cycle. I did not catch it quickly and eventually the plastic frame broke. That was easily replaced. Inspect the ice tray to see that all cube surfaces are smooth. If there are ...
...dump tray when the machine was on. I couldn't get the dump tray back in so I removed the brew unit. I'm still having a problem getting both the brew unit and the dump tray back in the machine. what ...
Question about LSC26905TT Side by Side Refrigerator
...dump the tray and immediately refill it with water so you can observe if everything is working. LG has a new ice cube tray to solve this problem. Part number is 3390JA1150A Sgt 48 ...
icemaker After my icetray dumps the ice it does not level out when it returns to ice making position so the water shoots out in the freezer and only partially fills tray. Not sure what to do to make ...
...I have even seen it twist the tray, but it won't dump it.. sounds like the icemaker timing or motor is bad. those parts are not replaceable on this model, you would need a new icemaker ...
Question about LRSC-26922 Side by Side Refrigerator
...tray.....just wont dump when it freezes I've maker makes ice but won't initiate the dump cycle on its own. I'd I push the button on the bottom of the unit it will dump the ice and refill ...
...tray don't dump the ice maket is on I know there should be an on and off switch to dump the ice but I don't know where it is The on off switch is the bail, if it is up it will not dump the ice the ...
Question about ID0452A-161 Dice Cube Air Cooled Ice Machine
...switch, water level sensor above tray. Follow drain to the white hose will lead you to dump valve black n blue (in most cases) water sensor should stop it from over flowing... descale water ...
...manually The mechanism (motor) in the tray housing is bad. Trying to manually turn the tray to dump the ice can actually do the harm to the motor. Not advised. You'll need to buy a new Tray
Question about RS2534 Side by Side Refrigerator
...tray dump motor, switches, etc. at the front of the ice maker assembly, or is there something else I should check first? We occasionally find the bin has run out of ice, and the tray is stuck in the ...
Usually answered in minutes!
3,171 Questions
1,894 Questions
1,239 Questions
1,098 Questions
927 Questions