...dryer. About 15 - 20 seconds later pilot will light and flame goes on. One minute later the flame and pilot go out. The one minute after that pilot goes back on and flame starts again. This is all ...
flame goes out when dryer starts, I get a nice hot flame but it goes out after about 20 seconds. If this unit has a pilot flame, the breather around the pilot flame has become dusty. The best way to ...
Question about Neptune MDG5500AW Gas Dryer
...dryer flame ignites -- it takes about 40 seconds -- then after the dryer flame starts, it goes out in about 1 minute....what could be wrong? The 'radiant sensor/ needs to be replaced. This sensor ...
...dryer heats up when running about 10 minutes then the flame shuts down. It takes about 25 minutes to run and the flame goes on but same problem as above. The Model is a DG410. usually when this ...
Question about Neptune MDG7500AW Gas Dryer
...flame goes out after about 30 seconds. I have The flame goes out after about 30 seconds. I have replaced both coils and once again the flame goes out after about thirty seconds. I can see the heating ...
...the clothing is very likely to combust and catch on fire. Please reply and let me know if your having a dryability issue with your dryer or where you just concerned since the flame went off?? ...
Question about AGS17AWF Gas Dryer
...dryer flame stays on for 30 seconds then goes out, puffs back towards gas valve flame goes out then it puffs out and back t owards the gas valve the gas valve coils. Maytag Dryer Gas Valve Ignition ...
...flame goes out My dryer will start and the flame will be on. I look a few minutes later and the flame is off. I turn the dryer off and start again and there is no flame. I have a whirlpool duet. Try ...
Question about WGD9200S Gas Dryer
dryer lights up in beginning for about 2 minuets then flame goes out and does not relight. What's the problem? Try YouTube dryer repair instructions. Here is a link to get started: https://www.youtube
Question about Dryer. Gas Dryer. 7.0 cu. ft. in White WGD4800XQ
dryer on. The ignitor should glow bright orange first. After Ignitor glows brightly the next thing will be the flame lighting as the gas valve opens with a click. All this should happen within about a
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions