Questions & Answers for: drum count

...You need to reset the drum count. Open the toner door. Hold the "Go" key until all 4 lights light up. Let go of the button and close the door. That should reset the drum count and stop the

...drum? Could the count also indicate that the copier will also have to have the toner replaced at the same time? There is a chip on the back of the drum unit that keeps count. It cannot be reset. You ...

...Drum Cartridge Platen Scan Page Counts: Number of pages scanned using the Document Glass ADF Scan Page Counts: Number of pages scann Go to reports and print the system configuration. You can view the ...

...drum count but when I press options, no display comes up to reset. Just beeps loudly at me. You have to open the front door and then press options, should see Replace Drum? just answer yes. The ...

DRUM COUNT press OK -RESET LIFE COUNT press CLEAR / BACK arrows 99 and OK ready drum unite must be replace not reset.Because it has a chip which configure default page count Normally on printer.. Open

...Cartridge Replaced Toner Counts: Number of new Toner Cartridges installed in the machine Replaced Drum Counts: Number of new Drum Cartridges installed in the machine Current Drum Page Counts:

still get warning You need to reset the drum count on the machine. To do this press [MENU], [5], [2], [04] then when it says reset drum count use the up or down keys until it says yes then press enter

...drum count. 1: press ONLINE button once. The lcd display will read offline. 2: press MENU button until the lcd display reads MAINT. Menu. 3: press ITEM+ button twice. The lcd display will read drum ...

Drum count, indicating how many times the photosensitive drum has been rotated 5) Drum change count, indicating how many times drum replacement has been made 6) Toner change count, indicating how many

...Purchased a second hand Zoom MRS-802 and can add tracks but cannot seem to get a count in before drums start?Tried the different options of a 2 or 4 count in even tried turning off count in but ...