Questions & Answers for: Chevrolet 2500 drum

i can not get the rear brake drum off to replace the pads. do i have to take the axel apart to get it off? 3/4 ton full floating axle rear ends do need the axles removed to remove drums yes

cannot remove brake drums Tried penetrating oil, cannot remove plugs (?) to turn adjustor, loosened parking brake cable (P. brake has not worked for some time), drum will not budge. Pry bars, sledge ...

Trying to get rear braKE DRUMS OFF A 1995 cHEVY k2500 Okay, we're talking about drums and not rotors, correct? Some drums have two tapped holes into which you can screw the proper bolt and it will ...

Do you have to remove the axle to replace the rear brakes?Or can you remove just the drum? you are right just the drum give these websites a try www.alldatadiy.com and www.autozone.com if all fails ...

I am trying to do a brake job on a 1991 Chevy 4X4 on the rear brakes. I can not get the brake drum off. On the brake drum backing plate under the truck on the rear, you will see a slot near the bottom

rear drum brake diagram for 1996 chevy 2500 LOOK AT THE BRAKE DRUM ASSEMBLY ON THE OTHER WHEEL.THUMB OF RULE NEVER REMOVE DISASSEMBLE BOTH BRAKE DRUM SHOES AT THE SAME TIME.BECAUSE THE OTHER BRAKE ...

how do you remove rear brake drum on a 1992 chevy 2500HD make sure parking brake is off and tap medium to hard around brake drum to free it up then tap it off with a hammer they can be tough good luck

I have a 1980 Chevy 3/4 ton I am trying to replace the rear brakes and can seem to remove the brake drum. Is there a trick to removing these? Depending on which rear axle it has you may have a drum ...

how do i get the drum off so i can replace my rear breaks? Do I need to take the bearrings out to get the drum off? heavy truck like 1 ton then yes

1994 c2500 rear drum removal problems (1) Make sure you don't have the emergency brake on.(2)If the drum is badly rusted around the studs it will take some finesse on your part.Start by spaying ...