Fried Woofer I turned on my speakers and there was no signal being sent to the amp. very strong smell of buring. Thought it was a power supply (wall wart). Then saw smoke coming from the speaker cab. ...
Question about Multimix 8 USB 8-Channel Mixer Spdif System
clip signal on Alesis multimix 12 USB - no inputs! My Alesis mixer was working well for a while but now I get a red clipping light -- and a horrible hum -- even when there are no instruments or cables
My masterlink won't let me select digital input. It blinks and then goes back to analog. Just started doing that, and yes I do have a digital signal. reload the os. it is avail on the alesis site. the
cannot transfer beats from alesis sr16 to alesis sr 18 thru midi cable. Please advise. The sync signal that is sent on the MIDI cable is actually a "clock" of something like 96 ticks per measure. This
Broken equalizer I have an Audio Logic sc31 equalizer that no longer works. The band faders do nothing and it will no longer equalize the sound. what's more puzzling is that it won't allow sound to ...
digital input cable optical no signal on digital input The Alesis doesn't have an optical input. It will only receive digital input in PCM, at the sample rates shown on the front panel - 44.1k to 96k ...
Question about NANOVERB 18-Bit Digital Effects Processor
...drop out, no signal passes when it drops out These are older units (2 of them--same problem), 10-15 years. One drops out intermittantly, the other passes no signal unless mix knob is fully off. got ...
Question about RA150 Reference Amp 2x75 Watts
Alesis RA150 has a short somewhere between ch.1 and 2 input. The stereo/mono bridged switch is set for stereo. the input signal is going into the rca unbalanced input on channel 2. Both signal ...
Usually answered in minutes!
133 Questions
10 Questions
5 Questions