Questions & Answers for: driveshaft spinning moving

Chevy Tahoe 2001 Front wheels do not turn in 4wd modes. Front driveshaft is turning and actuator does move. I removed actuator and observed the motion when 4wd drive is selected. Mobil synthetic 75w ...

...and where the u-joints are try moving the driveshaft up and down. If it moves then the u-joints are bed. This will cause a tremendous vibration under a load and the faster it spins it will smooth

I am having a few problems on my 02 subaru outback sedan h6 3.0 my driveshaft feels like it is jumping. I am also getting a ping noise anytime I shift from park to reverse or drive. I am also getting ...

...the same in the rear wheels, jack them up and see if the wheels move, if they dont then remove the driveshaft at the rearend and then see if the wheels move. if the wheels turn with shaft off then ...

...park. cannot spin drive shaft The truck is in park, this means the parking pawl is engaged to keep the wheels from moving and it locks the transmission/ driveshaft. Try putting it in neutral

frontend shakes when pt 4x4 engaged Check the U-joints in the front driveshaft for play. Any side to side or up and down movement is unacceptable. Also check the joints at the front wheels. If they ...

...moving the internal parts.The actuator used to be Vacuum operated and the part would move a certain distance to put the transfer into high or low mode.  If the actuator did not fully extend or ...

still function but when I push the throttle the trimmer doesn't move. How do I solve this. Does the driveshaft spin.? Is the 'cutting' attachment in a work position? Is the attachment on properly

I have a 2000 tahoe and when I put it in 2wheel drive the rear driveshaft just spins but it won't move what could be my problem You have a broken diff or axel. rear end needs replacement,gears are ...

locker I think it's bad and what is causing my clunk. Jacked the rear driver side and spun tire and driveshaft moved then stopped and I heard click click click and driveshaft did not turn then a small