drive pulley off to change it? To remove the drive pulley off the final drive gear of the transmission you must have a special deep well socket Harley part number, HD-94660-37A. The threads in the nut
...drive off the bike, the front belt pulley, and then pull the trapdoor of the transmission with both shafts and their gears out to change the shifter pawl shaft. You may be able to change just the ...
...drive needs to come apart, so you can remove the inner primary cover to access the transmission pulley. This operation will require either an impact wrench, or a torch, to remove the engine sprocket ...
...drive pulley cover and ease the belt off. Now the worst bit, the swing arm has to come off to allow the belt to go around it. Disconnect shocks from swing arm (lower mounts only will be ok) Remove ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions