Questions & Answers for: drill motorcycle lock

bit and drill out the lock, turn with screwdriver, should start right up, second, carefully take apart the bike, getting to the keyguard and remove the lock, then take the lock apart, get it re-keyed.

lock. any ideas on how to get it out without making a spark and going KABOOM? remove the fuel tank leave the cap off and get a small drill bit and re drill the hole using a hand brace or a nut driver.

...but am missing the lock. some steering lock barrels have a spring loaded pin which goes into a drilling to secure..to remove well a bit of dismantling of the innerds with what ever you have to ...

...lock & keys (but no locking rivet into chassis yet) Is it just a matter of cutting of rivet head then drilling out the chassis VERY carefully. (Dealers can't find the rivet listed) Perhaps I may be ...

lost key for gas tank filler, lost key need to remove filler to replace lock assembly or have keyed 10mm drill bit drill the key hole, and then unscrew the lock from under neath after taking cap off.

...to get under the seat to get some important documents urgently! help! drill out lock, its simple, drill bit in keyhole and push until go all the way thru, lock will fall apart with little ...

...key lost bought new after market ignition switch . is there any way to unlock it by picking it or drilling it Simplest way is to go to a dealer, give him the VIN number and get the correct key to ...

How can i unlock my seat in my 2001 gsx600f now that the lock broke? How does the seat open now ? Drill out the lock cylinder.

...my key in the fuel cap. You might have to drill out the lock By drilling a hole down each side of the key slot and put steel pins in the holes and twist the key way if possible to unlock the ...

How do I take seat off Kawasaki zzr 250 motorbike if lock is Brocken You need to drill the lock out, do not pry on it!