...strike plate on the jamb. Look between the door and the frame when closed and see if the lock is hitting the strike plate. You can also see if pulling in on the door more than normal gets the lock to ...
...door is hitting the Strike Plate. Close the door and watch where the latch is closing on the frame. If it is hitting above the Strike Plate then you can shim the Upper hinge, Shim bottom hinge if ...
...door frame while the strike plate is removed. Hold the strike plate in a vise and enlarge the hole with a file. If you don't have a vise or an appropriate file, find someone who does to help you. And ...
Question about Kaba Ilco Unican 1000 keyless lock
...strike. as soon as the door is open adjust the strike so this does not happen again. if there is no room for strike adjustment you can get and install small door bumpers on the door jam to keep the ...
...door latch and strike plate alignment. Close the dishwasher door slowly and observe the door latch meeting the strike plate. Determine whether the latch is striking the plate correctly. If not, use ...
Question about Duet GHW9150P Front Load Washer
...Door strike doesn't go in the latch, seems a mechanical issue. There is a little white pin inside the latch on the way. Any ideas what can be wrong? Hello, Does the door strike seem to be broken ...
...door strike. More commonly, the door strike can become bent or misaligned over time and may interfere with the connection. If not clear to the naked eye, you can determine if the door strike is good ...
...door strike. More commonly, the door strike can become bent or misaligned over time and may interfere with the connection. If not clear to the naked eye, you can determine if the door strike is good ...
...door strike. More commonly, the door strike can become bent or misaligned over time and may interfere with the connection. If not clear to the ***** eye, you can determine if the door strike is good ...
Kenmore elite washer he4 door striking mechanism Striking mechanism is stuck in door latch assembly. I took the striking mechanism off the door and put it into the door latch assembly to see if there ...
Usually answered in minutes!
208 Questions
160 Questions
140 Questions
126 Questions
