Kenmore Elite Model 13782 Dishwasher The door will not close, it keeps jumping open even when empty (there is nothing pushing it from the inside. I have had it for about 8 months. Hi Lulie, I had a ...
Question about 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
...door spring kenmore elite built in dishwasher I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures ...
...door spring is broken on my dishwasher and will not support the weight of the door. The door falls quickly to the down position and could possibly cause injury. the door links are broken need to get ...
...door is broken; it seems that if you let it go it will fall to the ground. Has a spring/cable broken, It is a Sears Kenmore Elite model # 16984200. Can you tell me the part cosdt for the item? Thank ...
Plastic part connected to door spring is broken. Where can I buy the part? Kenmore Elite model 665.1315 From sears
Question about Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103
kenmore dishwasher elite door opens too fast, broken spring? Could be that, the spring may have unhooked or it could be a defective damper connected to the door. Remove the side panels and check the ...
Question about Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103
...opening and closing our kenmore elite dishwasher the door springs make an awful creaking sound, how can this be fixed Liberally lubricate hinges, spring and any other relavant parts with WD-40. ...
Question about 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
...Door springs are located at the left and right side of the door bottom. You will have to pull the unit a few inches from the installed location to see them. If broken, replace. If one slipped off, ...
Question about Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103
...dishwasher door? Cord attached to door popped and door drops. The door spring can be seen on the side of the frame just below the bottom of the door. If the spring has just popped off you can put it ...
Question about 665
door switch is not stuck in the closed position. Check the wash impeller: Make sure that the wash impeller is not clogged or malfunctioning. Contact Kenmore customer support: If you have tried all the
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions