Questions & Answers for: door interlock

Question about Neptune MAH5500B Front Load Washer

1 Answer

...door interlock could be faulty. The only way to open the door if the door interlock is faulty is to remove the top of the machine, after turning it off at the wall and pulling the plug out of the ...

Ad

Question about Aquarius WF000 Front Load Washer

1 Answer

...prevents door opening when machine is operating. why do you want to change it? to access interlock. remove door gasket from cabinet in area of door handle and interlock is held by 2 screws from ...

Ad

Question about FJS1225W Front Load Washer

1 Answer

...door interlock problem, how do I go about replaceing the door interlock (if this is the problem)? Display error E40 is normally associated with interlock problems and this covered in your manual. The ...

...board trips Probably a short in the door interlock, get a replacement interlock, remove plug, remove outer door panel (beware, sharp edges) replace interlock, outer door panel and test, should be

...to replace either the door interlock or the metal spike the interlock holds as the interlock is plastic it wears out look up the model on ebay and look for 'door interlock' quite cheep like £20 or ...

Question about FJS1225W Front Load Washer

1 Answer

...door interlock. I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing programme): Press and hold down START/PAUSE and any of the ...

Question about FJS1225W Front Load Washer

1 Answer

...door interlock. I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing programme): Press and hold down START/PAUSE and any of the ...

Question about FJS1225W Front Load Washer

1 Answer

...door interlock. I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing programme): Press and hold down START/PAUSE and the nearest ...

...door interlock. I suggest rapid reading alarm code when appliance is in normal operating mode (e.g. during the execution of the washing programme): Press and hold down START/PAUSE and any of the ...

Question about FJS1225W Front Load Washer

1 Answer

...door interlock How to access the slide door interlock, as the slide door only opens half way, gas cap open or closed. There is an interlock between the RH sliding door electric and the gas cap. The ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...