Questions & Answers for: doing code 10 test basic

...code.I hope this helps,or get back with any codes that are actually stored in vehicle computer,these will need to be read by a garage that has the correct reader to do this.the catalyic convertor is ...

Ad

Question about 2001 Impala

3 Answers

...code into the stereo if your battery is dead? if not,then disconnect the positive cable from your cars battery for 10 minutes,this will reset the cars computer system.you may have to reset your radio ...

Ad

Question about 1990 F150

1 Answer

...10 seconds. Turn the ignition switch ON but do not start the engine. For vehicles with 4.9L engines, depress the clutch during the entire test. For vehicles with the 7.3L diesel engine, hold the ...

...code system is pretty much the same no matter where the battery was bought or what brand it may be.................Date codes can read either 10/12 (Oct 2012) or B2 (Feb 2012).  Keep in mind AC ...

...10 code, I have cleaned the fuel filter and have also checked all fuel lines for leaks but the code keeps displaying and it is hard starting too much. You can try https://big-manuals.com/ ... stuff ...

Question about 1995 Town Car

1 Answer

...code to go away..How long dies a drive cycle take? All cars are different, you have to drive above 70 mph for a certain amount of time, have to do no brake slow to stops a few times, maintain 35 for ...

...code 2. fuel filter not changed. 3. O2 senses test through torque app. Wave form is ok (0-9 sine wave average of 4.5 v) Torque app measured fuel consumption is 10 (l/100)km and 10 Kmpl actual fuel ...

...code's stored in any module ? Your vehicle has at least 10 modules an a problem with any one could cause a no start . Your best bet , quit trying to play auto technician an take it to a qualified ...

...10 seconds?
or starts and stalls later? even driving long time
we can no guess symptoms,they must be told.
or?
use real scan tool OBD2, not some $13 code reader junk GRADE.
I do USA ...

...code this misfire, means, this. in TRUTH that cylinder has bad combustion. (means weak only or dead) caused by 3 things. 1: bad spark plug. or wires to it. or cop coil if is. 2: bad injector. 3: bad ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...