Questions & Answers for: doesnt boot up

Doesnt boot up turn on it starts up displays packard bell screen sometimes will show windows start up screen then reports disk read error ,swapping to CD as boot drive and trying to boot using a ...

doesnt boot up, do you mean it wont Power up at all? or does it turn on and wont boot into windows. 2 things you can do for either of these problems 1) If your computer doesnt power on, you may need a

Doesnt boot from DVD rom my inspiron e 1405 doesnt boot from DVD rom.... though the dvd rom works well.... i hav changed the dvd rom and tested it.... it works on other laptops well.... after booting ...

...doesnt boot? you mean it doesnt go to windows? or theres really nothing on the screen? whats the color of your power button on tower, it soldi orange, reseat all data and power cables from your hard ...

doesnt boot at allllll, pleaseeeee helpppp I have acer aspire 5050 that doesnt boot at all, when i push start button the power light stays on and nothing else would work.. i dont have any other lights

...power.. it doesnt boot. then I remove the new SATA Hdisk & again doesnt boot. did the cpu lights up, or it has power indications on it..? if there was no power, this could be power supply

doesnt safe ,,, help for your first boot cd/dvd rom, 2nd boot hdd is it serial ide or sata, then you can disable the 3rd boot device, if it freezes and does not save reboot your pc in some motherboard

...doesnt boot up do a system restore by going into the recovery manager page from F11 key on startup to a date when the sys was working fine. IF that doesnt work try enabling the low resolution mode ...

...doesnt boot up, I go to turn on the laptop and it doesnt boot up, just shuts down. never boots up, i tried to press f1,f2,f3,f4 at the same time while holding the power button, and nothing, ive ...

...doesnt boot up any more... it turns on i hear it run but it doesnt boot all the way up. I bought a new cpu thinking maybe it had overheated and crashed but that was not the case after installing it ...