...Dodge Dakota Have removed the seven bolts but the pump won't move Use a soft hammer and try tapping it lightly. If you try to pry it from the back, use something soft so you don't mar the surface and ...
Question about 2000 Dakota Quad Cab
Dodge Dakota Quad Cab 3.9L V-6 w/ cooling problems I have a 2000 Dodge Dakota Quad Cab 3.9L V-6 w/ A/C It is over heating what could be the problem It has a semi new water pump also new fan clutch and
Dodge Dakota 6cyl 3.9liter w/ air? 1. Drain the cooling system. 2. Remove or disconnect the following: * Negative battery cable * Fan and clutch assembly from the pump * Fan shroud and fan assembly. *
...Dodge Dakota truck. Before removing the belt turn the nut counter clockwise. You may have hit the wrench with a hammer to loosen it. Because of limited space, the fan and shroud have to be removed at ...
do u have to pull the motor to change the water pump on a 1994 dodge dakota no you have to remove fan and fan clutch as well as the belts
...dodge dakota. 6cyl. thanx Tony. the fan nut is part of the fan,you need to unscrew the nut from the water pump to remove fan,this is harder to do if you don't have the special tools to do this job ...
...dodge dakota water pump pully is broke so i cant take off the shaft that holds the fan and fan clutch im just looking for sugestions somehow you need to grab a part of the pulley to prevent it from ...
...dodge dakota? Use a long screwdriver to pry between 2 of the bolts while you loosen another bolt with a box-end wrench. Don't take any bolts out until you have them all loose. Does this make
...is the process of changing a water pump in a dodge dakota 3.9ltr pickup two wheel drive Thank you It must be taken in to be changed @.5 hour labor and removal of belts, your looking at about
water pump replacement fan removal Google it and watch a video. Just type in 2001 dodge dekota water pump replacement,
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
