Questions & Answers for: InFocus dmd board

...board and the dmd board might have some dust in the connection. If that doesn't work then your dmd board needs to be repaired or replaced. I do projector repairs if interested my ebay id is ...

projector has vertical white lines You have dirty contacts between the dmd board and the dmd chip, or the dmd chip is bad. If the dmd is bad you'll need a new light engine.

...the middle of the screen horizontally about 10% of thscreen , let me know if you have an answer, thanks You have a bad connection between the main board and dmd, or between the dmd chip and dmd

...dmd chip board, or the main board (eca controller) is bad. if the board is bad, you'll need to replace it, but it's over $500. take a look at the back of the TV set if you see that the lamp is on the ...

...dmd chip board with the main board. this is a little indepth. if you are not comfortable taking things apart (almost completely) and successfully putting them back together, send it in for repair to ...

...dmd board or broke the solder on either boards where the connection is. Check with a magnifying glass or microscope if you have them. The main board kind of plugs into the bottom of the dmd board.If ...

dmd board on the projector is probably bad. This is not uncommon for a unit this old. To reseat the connection you must remove the power input board,power supply/ballast,metal shield and then the main

over the screen??? Do you see anything from source on the screen apart from these dots? Are these dots scattered & very bright? Either your DMD( Digital Micro mirror Device) or DMD board is faulty

board and DMD drive board 2,to clean the the interface with some alcohol 3,securely plugged any questions, feel free to contact me We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD

board and DMD drive board 2,to clean the the interface with some alcohol 3,securely plugged any questions, feel free to contact me We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD