...display screen. Now, just turn the radio on, and your ready to roll. There is an additional step you can take to remove all codes from the radio and start from scratch by entering your own ...
...display in the cluster dash board usually say 14 when charging. But lately it has shown about 12, sometimes under that. I put a load test on it with everything on (lights, a/c, radio, etc.) and from ...
...radio. But GM came up with this crazy 3 piece stereo system. You have the display/selector, the tape deck/EQ, and the tuner. The antenna will be pluged into the tuner which is buried deep into the ...
...radio controls display all functions, but no sound comes out. The outputs are blown so you will need to have it repaired or replace it with a different unit. Also a dealer will have to precode any ...
...260. it means you can have an 'open' also--chec wiring in engine and harness--do another scan that displays a data stream-to pinpoint the problem--hav u done a tuneup-change plug wires and dist cap ...
...radio display. Depress AM/FM, write down the second three digits that appear on the radio display. Did you receive the 6 digit Radio Display Code? -- Go to Step 5 Send Radio in for repair 5 Contact ...
...radio are under dash looks just like a computer. the the display and if you had it a tape playerin the middle. need to replace them together as are matched units. remove instrument bezel rto gain ...
...radio will not show any display not loc r lock there is a button u push it will show u the time for just a few seconds can u tell me how to fix this people we bought it from dont know what is wrong ...
...plugs fitted nicely and connections is good the radio go;s on but display SECURE how can i reset the radio and how can i get a code Some radio need ant-thief codes you need to get it from the ...
Usually answered in minutes!
878 Questions
795 Questions
754 Questions
575 Questions
561 Questions
