...display. But when I sit the radio upright and look directly at the display it appears blank. Is there a fix for this, or is the LCD display basically kaput? The radio dates from 1986. I found a ...
...display for my clock and radio station does not show when the radio is on.Will a fuse had blown or is there another reason.It is a Sony MHC-EX50 Tuner SONY MHC-EX50 Het is al een paar weken verder, ...
RADIO BAND > AUTO PRESET for 2 seconds until "AUTO"flashes in the display 3 Press DSPL/ENT/MEM. The stations are stored in the memory from the lower frequencies to the higher ones. if a station can
display is dark You need to clarify this problem as your question could have many answers. If the display is dark or really black then the display could be broken. If it is just hard to see then it my
Question about Ninco 50368 Renault Clio Super1600 Playstation 132
...radio until the display changes to 0000. This can take over an hour depending on how many wrong code entries have been made. 2) When you get 0000 on the display, use the steering stalk and not the ...
...display and the radio will play it monatural. If FM radio signal at your area is very weak, this type of noise may occur. OK. See attached manual for the info on how to preset the ...
...by step. If FM broadcast is noisy, press "MODE" until "Mono" appears on the display and the radio will play in monatural without any noise. Only strong FM signals can be decoded to stereo.
Question about CFD-S300 Radio/Cassette/CD Boombox
i have sony hcdgn999d model display will sowe please wait dvd not working radio working I have same problem sony hcdgn999d model display will sowe please wait dvd not working radio working
Question about Dual-Alarm AM/FM Clock Radio with Automatic Time Set
...radio is plugged in and switched on. The time display shows a flashing 12.00 AM and a caption below shows "setting time" which it should do automatically according to the manual. However, the time ...
Question about Dream Machine FMAM radio with iPodiPhone dock (ICFCL75iP) Clock Radio
damaged or kinked. Not much you can do but replace with a new one. Would be expensive to repair if components are faulty. But if display is coming on but no radio then the alarm might need to be reset
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions