disk copy We have a poweredge 1650 server running Server 2000. Not running RAID. Just one 17Gb hard disk. The disk is making noises and we are planning on upgrading the whole system, but in the ...
boot problem i have poweredge 2600 with 2 disk with integreted raid. os is Win 2000 advanced server. I remove one of disk and puting again then system faild to boot. did not find boot disk. pleas help
...second that mean it comes from Raid controller. Dell calls PERC Controller. It usually reason of a disk failure. Install open manage server administrator on your server. See which disks are failed ? ...
dell server cont detect hard disk dell server cont not detect hard disk after booting it will give you no boot device found chk for boot sequence in the BIOS and chk the hard disk is detecting in the ...
how to install windows server for desktop windows cannot find hard disk, when i want to install OS.. You must check if your bios detect your hard disk. check also if you r hard disk is sata and if it ...
...with the version (RAID controller). Which Operating System do you run (or ran)? Are these disks Hot Swappable? Have you used hardware RAID controller or software RAID? Provided by OS. Do
...full while F: drive has 238 gig available. How do I get data to go to F drive. first I would try a "disk cleanup" to remove any un-necessary files and to compress old files. this should provide more ...
...Raid Controllers in the Dell Poweredge Servers are hot swappable. So you can just pull the faulty disk and then insert a new replacement drive in the same slot (Needs to be the same type and size
Question about PowerEdge 600SC (Refurbished) ( pe600sc/124 ) Server
I have a problem with a DELL PowerEdge not recognize hard disks, use a SCSI disk and one IDE, but not if it's a bad BIOS settings, or maybe drivers, can you help? PRimary hard disk drive 0 not found ...
Question about PowerEdge 600SC (Refurbished) ( pe600sc/124 ) Server
...freezes at boot Dell PowerEdge T105 boots so far but freezes with lights 2 and 3 lit denoting a disk problem. it has 2 disks in raid 1 configuration. cant access setup via f2 or utilities f10 ...
Usually answered in minutes!
139 Questions
105 Questions
98 Questions
37 Questions
27 Questions