...orange, sometimes images are broken up or unstable. THIS SOUNDS LIKE MAYBE A DIRTY HEAD.. OR A LOOSE CONNECTION BETWEEN THE LCD AND DAUGHTER BOARD.. MOST LIKELY A DIRTY HEAD, TRY A CLEANING ...
Konica Minolta dirty copies I am getting black ink dirty copies with my konica minolta c550. After taking out the black imaging unit I noticed there is black powder acummulating on one side of the ...
Question about bizhub 350 All-In-One Laser Printer
...it. The fuser presure roll can retain toner and it can put dirty images on the back of the copies. For major indepth service repairs, contact this vendor for a service call by a service
...Dirty optics can cause light images, white streaks can be caused by dirty cortron wires(becareful when cleaning the wire or all the wires 3 usually, Q-tip can help) , not enough toner in the ink ...
Did you try to clean beneath the copy glass? On digital machines, when the copy glass or optics are dirty, copy becomes verry light. How many copies do you have? pres 123 button. It also could be that
ERROR CODE F2-31 F2-31 = Process Control Error. This is usually just a dirty Image Density Sensor. If you are able to remove the drum unit check that the Image Density Sensor is not dirty or blocked. ...
Question about Aficio 1013 All-In-One Laser Printer
Images appear only partially. The paper is damp. Use paper that has been stored in the recommended temperature and humidity condition. For details about the proper way to store it, see "Paper Storage"
...copy.If fuser problem the fuser unit not fixing the toner to paper (not fixing image).Light copies :dirty optical parts,Organic Photo Conductor drum,charge roller or charge corona wires or charge ...
...portion of the imaging unit and correct as necessary,clean theIDC registration sensor windows if dirty,clean the contact of the imaging unit connector if dirty,check the high voltage connector for ...
Question about DS316L DLP Projector
...images projected, lens cover cleaned still there, don't know what may be causing it. I wonder if colour wheel got dirty or the slot the dmd chip enters became dirty, any suggestions welcomed. If ...
Usually answered in minutes!
371 Questions
397 Questions
331 Questions
310 Questions
259 Questions