Questions & Answers for: Sharp dirty clothes

...Tech Support said clean drum surface with wadded-up paper. (The drum initially appeared a little dirty, but wiped clean with dry cloth) Using paper left fine-line scratches along the surface of

...the same point. This "green bar" (registration roller) could be a few things Registration sensor dirty or inoperable Feed tires dirty Registration rollers dirty Fuser gate broken For item 1 the ...

...a Sharp SF 2530 and when I copy, half of the page has black on it. Any ideas? Potential causes: dirty rollers, dirty glass, bad fuser, or even a bad drum. I'd start with making sure all of the ...

changes the ribbon, with no change in the problem. Help! The scanner that scans the paper is likely dirty. Pull the cover with all the buttons toward you, and clean the glass that the paper slides by,

... I have tried all of my cds, and every time it says there is no disk in the unit. Laser is probably dirty, try cleaning with a cd cleaner, if this doesn't work you will have to remove the outer case ...

...the paper tray and look at the rollers that feed the paper..give them a clean.They may have gotten dirty and the paper is slipping.. goo luck ...

...a small glass-like strip above where the drum fits, till clean. Check that the paper tray is not dirty with toner and if it is , wipe it clean. Slowly turn the semi-circular feed rollers while ...

...the rail, problem remains, any suggestions? L1 mean scanner not home position or copy lamp area is dirty.Clean all surface by soft cloth. Assembling again all cover and body.Power on may be fix your ...

sound that it wants to pull a paper if so then the rubber like responsible for pulling the paper is dirty and needs to be cleaned with a properly wrung wet clothe. if it does not give you a sound that

...remote with a wet cloth, and then switch cleaning spray to ensure the problem isn't a stuck key and dirty switch contact. If that doesn't work, just order a copy facsimile remote made for the ...