clean the roller The copies are coming out with smudgy paper that indicates the rollers in side are dirty. Moisten a lint-free cloth with deionized water or isopropyl alcohol, and scrub the roller. So
...be no clogs. So the next step is a printhead. Print cartridge When the print cartridge contacts are dirty and the printer cannot detect/communicate with print cartridge. Clean the contact points on ...
Question about Stylus Photo R300 InkJet Printer
...head use wet cloth to clean, repeat until problem solve. If not try soak with warm water just at dirty part only not hole print head, ...
Question about Artisan 800 All-In-One InkJet Printer
...inch wide. This stip is where documents fed through the ADF is scanned. Chances are, this strip is dirty. Take a damp clean cloth and wipe it down. I use isopropyl (rubbing) alocohol and do a quick ...
...feed. Paper feed ok as photo copier.... no go as printer. It seems that the paper feed mechanism is dirty. please clean it with a moist soft cloth/tissue. NOT WET but MOIST. As regards printing goes, ...
...can I cure streaking on the reverse of the paper? Epson S20. streaking on the reverse side suggest dirty rollers. 1. remove cartridges form the printer 2. disconnect all cables 3. check full paper ...
My Epson CX 3900 has original catridges but do not print correctly. I think it has dirty injectors or similar problem, but it not posible repair whith software, Thanks you can get a damp cloth, take ...
...rollers are trying to load the papers unsuccessfully Printer's Paper Pick up Rollers get dirty or worn out with the passage of time. Hence, require cleaning or replacement if worn out. In ...
Question about Stylus CX9400 Photo Printer
...it also copies the background of the original and takes more ink and more time. The optics are dirty.Use a flash light and look at the optics on the printer.I'm sure you will see their ...
Question about Stylus Photo R300 InkJet Printer
...the ink out of the sponges inside your printer with paper tissue or old cloth. Be careful this is a dirty job. don't do this when there is power on the printer. You could damage the printer. I do ...
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions