Questions & Answers for: dimmer circuit Hammering

...circuit off, take the dimmer out, wire nut the two wires together, turn the circuit on. If the light comes on normally get yourself a new dimmer ($10). Make sure to turn the circuit back off before ...

Circuit 1036 (BR/W) from headlamp switch. Operate dimmer switch to LOW setting. Operate dimmer switch to HI setting. Using a voltmeter, check for voltage to Circuit 1035 (O/R) from headlamp switch. Is

...dimmer switches, the circuit won't work. However, newer technology allows for double 3-way dimming from different locations. See this article about how to do this: ...

...dimmer switches in the same circuit. I did not have two dimmers in the same circuit at the same time. The 3 ways work fine without the dimmer. The lights would not dim with either switch. Here's a ...

2 n2000 dimmers controlling lights in funeral chapel are in dimming mode horizontal lines appear on video screen increasing in intensity as more dimming is applied. two circuits supply lights with a ...

...circuit? Remove the dimmer from the wall and examine the electrical connections.  Did your wire nuts come loose?  Are there any wires broken?  It is STRONGLY advised you turn off the ...

...dimmer switch signal circuit to the BCM. The BCM interprets the signal and applies the dimmed voltage to the I/P lamps supply voltage circuit and the interior backlighting components dim to the ...

...dimmer to a one way circuit. The product has two wires coming out of the dimmer. The wall socket has two red wires connected to each other and a single blue wire. Do you mean a three way dimmer? How ...

...circuit. The dimmer switch varies the voltage and returns the new voltage to the BCM through the dimmer switch signal return circuit. The BCM uses this voltage to determine the illumination level of ...

...dimmer switch signal circuit to the BCM. The BCM interprets this voltage signal, then applies a pulse width modulated (PWM) voltage through the I/P lamps supply voltage circuits and the LED dimming ...