Questions & Answers for: digital optical input

...optical digital can you help me on how to get this receivers optical digitalout audio to work.my tv is connected to my cable box via hdmi,my receiver the kenwoodvrs-6100 has no hdmi connects but it ...

digital optical ive tried hooking me ps3 up to the amp using a digital optical cable but no sound ? You must go in to the menu on your amp and select the optical input for that device. Most are ...

...optical to the receiver. I cannot select a digital or an analogue input because the button does nothing. I am getting no sound via my optical cable input. The back of the AMP says that the optical is ...

...optical digital out from blu-ray player to denon amp AVR-3801 optical 1 audio in but not getting any optical digial sound when playing a blu-ray disc. Have 2 front speakers, 2 rear speakers, 1 ...

...digital input connected (optical from tv to receiver --> audio), but can i connect this input digitally to my dvd-player, tv, and dss, to all the three at the same time? In the menu i can select ...

...digital signal is outputted only through the Optical or Coaxial socket of the CBL box. you will have to get an optic fiber or coaxial cable depending which cable box you have and connect it to the ...

...digital optical input, run a digital optical cable from digital optical OUTPUT on TV to digital optical INPUT on receiver. If receiver is older and only has analog inputs, you can get an 1/8 inch to ...

...optical "Digital Output" jack with an optical cable to the amplifier's TOSLINK optical input jack to obtain theatre sound. To listen to the program shown, you would select the amplifier input ...

...optical digital in for? If you look on the back of some 5-disc CD players, you will see a similar optical output plug. You can plug an "optical" (fiber optic) cable between the CD player and the ...

...digital or optical on my Kenwood Kraft-v7772d? Thanks To switch the input on your Kenwood KRF-V7772D receiver from analog to digital or optical, follow these steps: Check the Manual: First, consult ...