Questions & Answers for: digital input self check error

...50 V, BOTH LOCATED ON THE MAIN PCB Do self test by pressing Input/Device and Menu at the same time for 5 sec. the set will show a 2 digit seq. first blinks followed by a short pause then the

self-diagnosis feature to help with diagnosis of shutdown problems. To activate this turn the unit on let it shutdown then press the input/device and menu buttons on the front panel simultaneously and

...self check this set has, when power light goes off, ON THE FRONT OF THE SET PRESS AND HOLD BOTH THE MENU AND INPUT (DEVICE) BUTTONS FOR AT LEAST FIVE SECONDS AND RELEASE BOTH. Watch the power light, ...

...self check this set has: when light goes off and front of set press and hold both the menu and Input (device) buttons in at same time for at least five seconds and release both buttons. The set will ...

...input buttons for at least five seconds and release both buttons. Watch the power light, if it has the self check feature it will blink a two digit error code. The most common is two blinks, two ...

...self check----if Green power light comes on for a few seconds and goes off on the front of the set press and hold both the menu and input (source) buttons at same time for at least 5 seconds and ...

...self check this set has(I will be here on and off for a while): when light goes out on the front of the set press and hold BOTH the menu and input (input can be labeled source on some models) for at ...

...self check feature, when it shuts off do not unplug it, press menu and input on the front at same time for at least 5 seconds and release both buttons, if it has the self check the power light will ...

...input setting The model listed has a self check: when you turn it on and green power light comes on and goes out in a few seconds, on the front of the set press and hold both the Menu and Input(input ...

...self check this set has when it shuts off Menu and input (input is source) buttons on the set both held for five seconds or longer, then release both and look for the power light to blink a two digit ...