Questions & Answers for: dialing tone intercom

Question about Meridian 9417CW 2 Line phone

2 Answers

dialing out? Do you access a line, dial 9 from intercom? The dial tone is probaly the phone system generated dial tone. With more information, I can help.. On my 9417cw this happened from time to time

Ad

Question about Meridian 9417CW 2 Line phone

2 Answers

...was not able to help me. He read the same manual I did - I still can't get my phone off phonebook or get a dial tone. At times my intercom phone will say, "line in use". J. dial *68 and it should ...

Ad

no dial tone on uniden 5.8GHz digital phone sounds like maybe it's on intercom. Lost the manual. How do I get back the dial tone? there is no dial tone on my land line uniden 5.8 ghz.

Question about Corded Phone avaparp18d

1 Answer

...tone at pick up There are four lines on the phone, all have dial tones. The last line is its own phone number. How do I program the phone so that it picks up on the last line first? Thank you! This ...

Question about 6714 14 Button Executech Phone

1 Answer

...restricted or what you are hearing is intercom tone and not dial tone. the phones may be set to dial out from a diffrent line grop as well have you tried dialing 81 82 instead of 9 and see what ...

...tone get more lines. Or check Auto line select. From ext 10 or 11: press feature 00 press left intercom twice press right intercom once enter extension number press ** then press the lines in the ...

Question about Lucent MLS-12D Phone

1 Answer

...i tried a number from my intercom, i am not able to get dial tone in one shot, i have to press 0 three times,,but intailly i got dial tone in one shot Sounds like you have a bad touch tone dial

Question about KX T7220 Corded Phone

1 Answer

...from I believe. 1 Press program key 2 Dial 99 3 Press line key or intercom key twice 4 Dial 1-8 for tone type 5 Phone will ring with new tone 6 Press store button(autodial) 7 Press program key to ...

Question about T7316E Corded Phone

1 Answer

...a call It's in system programming: feature CONFIG, Terminals & Sets, enter ext #, Prime Line: set to I/C (for intercom dial tone) or Line ***. It is probably set to None based on your

...intercom. Keep in mind that removing the "no dial tone" alert or disabling phone-related functionality on your B&O headphones may affect their warranty, compatibility, or safety. Therefore, it is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...