Questions & Answers for: Bosch dial pause

...dial to Off. I opened it, repositioned the items, and closed the door. When I tried to start a new cycle, the Wash / Spin / Finished lights started flashing and the bell sounded. I can't open the ...

...Pause button and turn the dial anti clockwise at the same time until its position is pointing at the Express (15mins) program. Hold down Start/Pause button until the e2 message starts flashing (or ...

...dial until reaching the "9 o'clock" position. It will then continue until the dry cycle is complete. Thanks!! I have the same problem. I took out the timer control and spraid it with contact cleaner. ...

...Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time. 3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing ...

...Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time. 3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing ...

...knob anticlockwise to express. Now won't work as in no lights come on any ideas thanks never turn dials backward as in NEVER that destroys the ...

...Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time. 3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing ...

...Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time. 3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing ...

...Pause" button (3) Turn dial one step counterclockwise (4) Keep holding "Start/Pause" button for another 5 seconds. Check that the door switch is closing when you close the door with the latch ...

...Pause button and turn the dial anti clockwise (to the left) to the "express 15 min" program at the same time. 3. Hold the Start/Pause button for a minute (the e2 message is meant to start flashing ...