Questions & Answers for: Chevrolet Lumina diagrams engine pvc valve

...engine code indicates EGR valve. 1998 Chevrolet Lumina, 3100 V6, service engine code indicates an EGR valve problem. I installed a new EGR valve and reset the check engine light using an OBD II code ...

...pvc valve on 93 lumina 3.1l . the car dosen,t stay on keeps turning off. i already gave it a tune up. Below is a picture of a 93 3.1L engine vacuum diagram. There should be a label on your radiator ...

car don,t stay on.i already gave it a tune up. need diagram to locate pvc valve on 93 lumina 3.1l.my car dosn,t have one you can google that or see the valve on the intake manifold..

find a diagram of the locatation of the egr valve Exploded view of the EGR valve mounting (3.1L engine) EGR valve mounting arrangement (3.4L (VIN X) engine) View of the EGR valve mounting (3.8L engine

...PVC valve and clean the Throttle body with throttle body cleaner and very important that you clean the MAF sensor with MAF cleaner. This should get your car to pass the emission since it was not to ...

engine, and valve covers, clean the inside of the valve cover really well with solvent, and use a very small amount of permatex orange high temp silicone on both sides of the gasket, let it set up for

...PVC valve is located to the right of the power steering pump, under a 2 inch black cap, left of the intake. It blends in quite well. The spark plug wires run between it and power steering

...one was off, the engine would not run, as the vacuum draw is large. Please let me know if you cannot figure it out from these instructions and provide a picture, if you can. MAP sensor: purge

Need location of PVC valve & Speed Sensor on 93 Chevy Lumina, PLEASE Get a Haynes or Chiltons Manual for diagrams and instructions for your vehicle.

Location of PVC NOT PCV valve & Speed Sensor, PLEASE...for '93 Chevy Lumina 4dr sedan Please define a PVC valve. I've been a Chevy guy for 45 years and have never heard of such a device.