Questions & Answers for: Makita definition of busted fuse

Question about 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140

Makita BML 185 cordless flash light

Makita BML 185 cordless flash light Light just goes off after 5 to 10 seconds after turned on. The battery is fine. Thanks for any help replace charger/ burn or busted The problem is that the battery ...

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

2 Answers

Charger no light and wont charge

...FUSE OK WHATS THE PROBLEM WHY WONT IT LIGHT AND CHARGE Sorry to give you my opinion, but these chargers are very delicate, I have 4 and can barely keep 2 going. My recommendation? Open it up and look ...

Question about 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill

2 Answers

Charger not powering up, fuse is good?? what the

charger not powering up, fuse is good?? what the f---? Internal board fuse checked? This may/may not help? Makita 1850 battery charger FIX. A friend asked me to check his charger unit which had failed

Question about 6336DWDE 14.4V ½ Inch Cordless Drill/Driver Kit

1 Answer

Battery melted inside drill,released terrable

battery melted inside drill,released terrable fumes, Wow. Definitely contact this link http://www.makita.com/en-us/Modules/Service/ServiceCenters.aspx Enter your zip code and then call the Makita ...

Question about 6336DWDE 14.4V ½ Inch Cordless Drill/Driver Kit

1 Answer

Makita 1850 battery charger FIX.

Makita 1850 battery charger FIX. A friend asked me to check his charger unit which had failed after it had been connected to a portable petrol generator that incorrectly generated 317 Volts AC and not

Question about Angle Grinder

1 Answer

My makita angle grinder(9527NB) the

my makita angle grinder(9527NB) the on switch only works when it wants to. Turn it on dont work, bang it and it might work. Any suggestions This is definitly a bad switch. You can contact Grainger or ...

Question about HR3000C Electric Rotary Hammer

1 Answer

Hammer action not working when in chisling mode

hammer action not working when in chisling mode A gear in the gear case is busted... ( the teeth on it are gone ) I suggest you get it fixed before those missing teeth wander in between other gears ...

Question about DC18RA Rapid Battery Charger For LiIon NiMh NiCd Batteries

1 Answer

DC18RA battery charger i.c number

DC18RA battery charger i.c number pls give circuit digram for DC18RA battery charger call Makita...they've always been real good about warranty'ing their products... (they'll probably just send you a ...

Question about BTD144 18Volt LXT LithiumIon Cordless Impact Driver

0 Answer

I dropped my impact driver about 30 feet and now I get a very fast steady flashing of the LED and battery light when I pull the trigger and there's no power. Any idea what's wrong? The battery is def

I dropped my impact driver about 30 feet and now I get a very fast steady flashing of the LED and battery light when I pull the trigger and there's no power. Any idea what's wrong? The battery is ...

Question about Tools 18V 1/2" Lxt Lithium - Ion Hammer Driver - Drill Kit - BHP451

3 Answers

What would be the most likely cause for my lxph05 brushless LXT hammer drill to intermittently not turn?

what would be the most likely cause for my lxph05 brushless LXT hammer drill to intermittently not turn? Here is what I know: The Battery is good The little LED light comes on when the trigger is ...