Questions & Answers for: declination motor

...declination movement north south does not move but motor runs I'm going to assume that you know you need to tighten the DEC clutch knob, and that this was already done. There is an internal belt that ...

Ad

Question about U.S.A. Great Polaris Telescope Mount MTGP3812

1 Answer

declination motor at the same speed as the right ascension motor. The 1.5X, 2x, and 32 X speeds all work, but much slower. When the RA lead from the DD-1 controller is plugged in the declination motor

Ad

Question about U.S.A. Great Polaris Telescope Mount MTGP3812

2 Answers

my nordic track treadmill won't decline My wife had the same problem with her treadmill. I turned the beast on it's side, and unscrewed the plastic casing that houses the motor, computer, and all the ...

Question about U.S.A. Great Polaris Telescope Mount MTGP3812

1 Answer

declination motor does not working celestron advanced gt declination does not move the telescope. I hear the motor running but the telescope does not move. You did tighten the clutches? If you did the

Question about U.S.A. Great Polaris Telescope Mount MTGP3812

1 Answer

incline and decline wont move, so the belt wont move either. Have a jazfit treadmill I have a jazfit treadmill. The incline/decline wont work. The walkn pad doesnt move, so then the actual belt then ...

Question about Image 15.0R Treadmill Walking Belt

1 Answer

the incline and decline not working mechanism for controlling the incline and decline not working Please RUN the software calibration under the HOOD cover from the motor the instruction, for easy ...

Question about Image 15.0R Treadmill Walking Belt

1 Answer

Inclines down, declines up Incline goes in the opposite direction The unit has likely been disassembled and put back together incorrectly. The incline/decline motor runs on direct current, and ...

Question about Image 15.0R Treadmill Walking Belt

1 Answer

trimline 1050 treadmill not inclining or declining not inclining or declining How old is the unit? Is there a reboot procedure? Is there a circuit breaker reset or fuse for the incline motor?

Question about Excellent Condition Pro-form 400e Crosswalk Sport Treadmill Excercise

1 Answer

Why won't my treadmill incline or decline? When you push the incline or decline buttons it seems to try to move but then there is a clunking sound with a little jolt. Like a try and slip. Hi there, ...

Golds Gym Treadmill inclines all the way & will not decline, if you switch the red and black wires it will decline all the way & not incline. I replaced the incline harness & the incline motor & same ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Optics Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

Are you an Optics Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...