Questions & Answers for: day counter dates

...second pull for the hour and minute.Just do the first pull then wind it clockwise for DAY and the counter clockwise for DATE.Feel free to ask whatever the result... Hope this may help; Regards, ...

...counter-clockwise will not change the date, only the day. The day of the week will change with the day of the month. Don't worry; they might not match up at the end. It may be the 4th and say it's ...

...set the day (you have to turn it 24 hrs evey time to change one day). When this is done, you can set the date with the crown in position 2 and turn counter clockwise. i hope this answers your ...

...4127, how to set day, date on the subdial. manual was for a chronograph I don't have this model, but normally, invicta dates are set by pulling the crown out half-way and turning

...counter-clockwise on a watch. The only difficulty that may arise from this is making sure the date window (if you have one) syncs up; but a 1 hr change for time change will not make a difference. For ...

...to set the DAY itself and the time. On some watches the crowns first position allows both the day and date to be changed by turning the crown in it"s first position clock wise and counter clock

Day-Date. Not all watches have a quickset, but I'm sure your Timex does. Unscrew the crown from the stem by turning it counter clockwise until it is free from the threads. At this point pull the crown

...counter clockwise turn might advance the day of the week, for example. If all else fails, pull the stem out two clicks and advance the watch hands 24 hours for each day you wish to advance the

counter clockwise .the when you get near midnight the day will change with a back and forth turning you can advance as far as needed .I really hate this type watch as every odd month you need to reset

...untill date changes than back up about half an hour and go forward again some let you bump one day at a time faster that way, some just require turning the stem counter clockwise when pulled