Questions & Answers for: Harley Davidson dash removal

Question about Harley Davidson Motorcycles

1 Answer

...Road King Clasic . Thanks Bill O'B. remove big 1/2" nut below speedo, and + screw lower on tank dash, then lift intire dash and youre their. dose this

Ad

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

How do i replace the ignition switch on a 2001 Fat Boy remove the 1/2 nut that holds the dash on the tank lift dash turn over and remove the 4 screws that hold on the switch, reverse and done. if you ...

Ad

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

...the old ignition out and replacing with a new one. thank you If the ignition switch is under the dash that is on the tanks, you simply remove the small screw that holds the trip reset knob onto

Question about 2000 FLSTC Heritage Softail Classic

1 Answer

...out the screws and remove the lens. You can get to the bulb once you remove the lens. To remove the dash panel, remove the small screw inside the trip meter reset knob and pull the knob off in there ...

Question about 2000 FLSTC Heritage Softail Classic

1 Answer

...dash. Remove the seat. Remove the bolt at the bottom tank mount. Remove the nut and bolt at the bottom front of the tank. Disconnect the gas line on the left side bottom of tank. If the tank has a ...

Question about 2011 FLSTN Softail Deluxe

0 Answer

dash not working after removing dash and reinstalling dash, dash wants pincode Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day. Set ...

Question about 2011 FLSTN Softail Deluxe

1 Answer

taking dash Ho to remove the das.h remove the 1/2 " nut in the middle of the dash.

Question about 2011 FLSTN Softail Deluxe

1 Answer

...parts at all? If you mean the chrome extension panel that fills the area between the rear of the dash and the back of the tank, then yes, you will remove it and not use it. Most I have seen goes ...

Question about 2011 FLSTN Softail Deluxe

1 Answer

Dash Bolt loose at bottom I can't remove the nut holding my dash in place as the bolt rotates with the nut. How do i tighten the base nuts? get your fingers under the dash and pull upward as you try ...

...Tank Mounted Swithc Haven't tried anything yet. Easy,you need to loose the nut on the top of the dash console,then pull up the dash console and remove the connection wires

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...