Questions & Answers for: dash goes out

...dash light goes on and off while driving. THE AIR BAGS TURN OFF AND ON BECAUSE IT GOES BY WEIGHT... AND IT ALSO GOES OFF WHEN YOU ARE GOING A LOWER SPEED AND WHEN YOU ARE GOING A HIGHER SPEED THEY ...

Ad

...dash that goes across the front. there are 4 screws on the bottom to acsess these screws you have to take off the strip that goes just above the metal part on the bottom of the dash. this strip has ...

Ad

Question about 1988 Bronco II

1 Answer

what the part is called that conects to hose that goes from ratiator to the hose that's go to the dash probly conects to the heater sounds like you mean the heater core if it goes to the dash

...dash goes out. clicker works and door lights on? Hit starter and click and all dash goes out, and nothing, no even a click. Battery charged overnight. and Booster battery this morning and same. Door ...

Question about Kdc-152 Car Stereo In Dash Cd Player W Radio Receiver Head Unit

1 Answer

postive and negitive wires Yellow wire - goes to constant 12v Red wire - goes to Ignition switch Black wire - goes to earth (screws into metal bracket behind dash)

Question about Kdc-152 Car Stereo In Dash Cd Player W Radio Receiver Head Unit

1 Answer

...dash randomly goes haywire while driving. The spedometer jumps around, the malfunction indicator goes on and off and bells ding like you are just starting the truck. The computer doesn't throw codes. ...

the triangle piece goes back in on the side of the dash. Where can I find detail of how this goes back together? Buy a work shop manual, I all ways take a photo with my phone before i dismantle things

dash panel goes blank instead of dim. Dash panel has been operating normally until recently. Now when I turn the headlights on the dash panel goes blank instead of dimming. did someone turn the dimmer

...goes down It could be a dash grounding problem. The ground for dash electrical is up under the dash, into the firewall. Year make and model helps. Newer cars, ground could be a problem. Not likely . ...

...goes to the dash this is the feed wire to tell the dash what voltage is being made, sometime this connection can get weak and not contact properly so the dash would indicate no voltage being made, it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...