Question about imageRUNNER 400S Copier
Printouts are too light, and have black lines through... If I don't darken the density, the printouts are barely readable... if I darken the density, the printouts are mottled with dark lines. drum is
...printout from the fax is so dark that a "ghost image" appears so that there is a dark shadow effect in the middle of the pages. If I try to fax this to someone else it comes out as a dark blob on ...
line is too dark. I cleaned the roller, which had toner smudged on the right hand side. I also changed the black toner cartridge because I read somewhere else that when the toner cartridge needs to be
...printout in black and white. When I print pages in color, the black text and lines come as dark green and there are parallel light and dark lines running across the printed area. Dear Sir, You are ...
dark vertical line on the the printer is printing dark vertical lines on the middle third of all printouts.. samsung ml 2250 laser printer 90% or more of the time on this printer dark lines are coming
...printout and see if any lines occur... if none... then clean the glass table and the **** glass and anything else that touches them... look for white out and dark spots... if yes... then check your ...
...DARK ON THE OTHER SIDE, SOMETIMES THERE'S A LINE ? check the fuser... to see if one of the rollers has toner all over it... then check your paper path... to see if you see any obvious signs... then ...
Question about MFC 9700 All-In-One Laser Printer
...dark vertical line - on all pages. All other printing is ok except that vertical light area (can see most but not all of the print under the lignt area). I replaced the drum and no change. Is it ...
Question about WorkForce WF-3520 All-in-One Inkjet Printer
...Dark Lines in Printout If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: • Run a nozzle check to see if any of the print head nozzles are ...
Question about WorkForce WF-2530
...line of print is fuzzy. We have tried all the usual fixes, head clean, nozzle check. What next What should I do if my printout is blurry or smeared? - Epson ... ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions