Questions & Answers for: cylindrical diameter

...cylindrical part with a spring attached, cought in the place where the printhead park. This steel piece has 5 mm diameter and has two 2 mm diameter places probably for attaching two springs, but I ...

...your standing looking into the engine bay from the front of the car, it should be a fairly large cylindrically shaped object, 5-6 inches in diameter, about the same color as the engine block, and ...

need to replace the flasher module (located under the dash near the steering wheel a silver or clear plastic cylindrical object about 1" with 2"diameter) a common service part that runs from $5 to $15

...fuse (check your fuse box) or a failed flasher relay which is often mounted inside and under the dash board on the driver's side; it's a cylindrical aluminum can about 2" high and ~ 1 1/2"

...diameter cylindrical assembly oriented longways, fore and aft. It will have 3 wires attached. 1 of the three is the battery cable [large diameter] It is attached at the junction of engine and ...

a cylindrical water tank can hold 1 000 liters of water. Determine its diameter if it is 1.5m tall. 2 meters

...cylindrical and measures about 1.25" in diameter. Get an electronic flasher rather than a mechanical one, because they last longer and are more reliable. Yes, you can change it yourself, although ...

...Cylindrical barrels are the same diameter along their entire length and tend to be long and thin. Their slenderness makes them better for grouping but because they are long, the center of gravity is ...

I know its an old spec, but per ANSI Y14.5M-1982 what is the definition for measuring diameter? Our customer says that the definition of diameter implys a perfect circle. Per the ANSI document they ...

...thumbturn can not be removed which keeps me from removing the faceplate. Likely there's a tiny hex head screw, may be 3/32 inch diameter or less along cylindrical base of the latch