Questions & Answers for: Ford Expedition cylinder miss

...you are referring to an engine miss, or misfire. There are 8 individual ignition coils (one for each cylinder). Replace them 1 at a time until you find the faulty one(s). This is normally the

...miss firing in the third cylinder. Replaced all ignition coils and sprak plugs also fuel pump. After 100 miles it started with the same symtoms? What else could it be? It could be a bad computer that ...

miss on a cylinder, and it turned out to be a bad coil pack. You have 2 cylinders missing, so I would check each cylinder for good spark, or replace the coil packs as necessary to see if that resolves

cylinder #1 misfire in 1999 expedition 2000 exp miss more on a pull but miss alot

i have a miss in number 4 cylinder is it a bad coil, spark plug, coil wire or fuel injecter code reader says number 4 cylinder isn't firing I would start with the spark plug, then plug wire.

...miss over 50mph starts missing over 50mph. showing code po156 On a Ford. bank 1 is on the side where cylinder #1 is and bank 2 is on the side where cylinder #1 isn't. On the Expy, cylinder #1 is on ...

...cylinder miss fire. It feels like a fuel prob to. Can u help? Figure if you are running with 7 cylinders firing instead of all 8 you will have a power loss and jerking from the dead cylinder. You ...

Where is the #1 cyl. ford expedition 2000 5.4 liter I need to change spark plug in #1 cylinder to check if it fixes miss fire. cylinder 1 is passenger side front cylinder.

miss fiers i check plugs, coil, cylinder, There are frequent problems with the parts you already replaced. The crank sensor and cam sensor can affect firing. Check intake for vacuum leaks with a water

fix miss fix miss fiers i check plugs, coil, cylinder, is it giving you a check engine lite?