Questions & Answers for: Chevrolet Lumina cylinder miss

Question about Chevrolet Lumina

1 Answer

Engine stalls when cold, Engine has a miss and I have replaced the plug wires and plugs and this did not help.This is on my 1990 Lumina 6 cylinder. make sure you put the plug wires in the right spot.

Ad

...euro was running badly. the coils send the spark to the spark plugs, if you have a bad coil, the cylinder won't fire. which would explain the gasie smell. a bad coil will also contribute to loss

Ad

...what am I missing? Check the DIS module or injectors. Check to make sure you have a spark on each cylinder. One cylinder could be ...

miss at this location. I have changed the injector out but it did not help. what next? do a compression test on the engine to see if the valves are working properly. You may be able to borrow a tester

Question about 1995 Lumina

1 Answer

...miss in an OBD-I era vehicle, take the car to a technician who can test which cylinder is missing and whether it is due to lack of spark (like a wire, or plug, or coil) or a bad fuel injector (not ...

...have a problem where the ticking is coming from. You may have to run a compression test on that cylinder you put the rocker arm on, are that side of the motor that is ticking. Could be the cam ...

Question about 1993 Lumina

1 Answer

I have a 1993 chevy lumina with the 3.1, it has 200k+ miles and the motor is missing really bad, it just runs like it has a bad plug but thats not it.. Any suggestions? 200000 MILES ON ENGINE COULD BE

...miss-at-idle.html ----------- While stop engine idles like cylinder missing? http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html ------------ Engine Misfire codes ...

...mention the plugs. Try moving one of the plugs to a different cylinder and see if the miss follows it. It could also be the ignition module. (the thing the coil packs mount to.) See 3 and 6 won't ...

...the plugs are fine then an ignition wire or a coil will cause the same symptom . If you had a code reader it would show you which cylinder is causing the miss. Beyond that a compresion test is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...