Questions & Answers for: Subaru cylinder miss

miss fire in cylinder #1, 1998 subaru legacy outback Have DTC Code PO101, a miss fire in cylinder #1. I have inspected the spark plugs but all are in good condition. A tune up was done approx. 30k ...

...miss' which is noticeable when idling. When the car is being driven it becomes barely noticeable. It could be an easy straight forward repair, I have been led to believe that it is the rear near side ...

...miss on #3 cyl. new plugs,wires, and coilpack check for vaccum leaks, gasket leaks, injector leaks! and test coil packs to see if module is good and you get spark to every cylinder and see if you get ...

now the check engine light is on and the scan says my #2 cylinder is missing i checked the plugs and the wires and nothing looks bad any ideas? YOU COULD HAVE A CLOGGED OR FAULTY FUEL INJECTOR. OR YOU

...cylinder miss in a 1997 subaru outback 2.5 liter coil pack, wires are good. #3 plug can be heard firing through the exaust at idle. timing? lifter shims? sloppy timing belt? Do a cylinder compression ...

...miss-at-idle.html ----------- While stop engine idles like cylinder missing? http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html ------------ Engine Misfire codes ...

...3 different mechanics 6 times now and no one can find the problem. do a compression test on each cylinder to find out which is ...

...its cycle. What is causing this? Is this one of those plug boots that also seals the hole in the cylinder head around it? The plug might be loose,or missing a gasket(if it is supposed to have ...

the cylinder turns, it is a plastic clip inside the door that holds the linkage that has broke. Dealers don't sell them and it is hit and miss at parts stores. If the cylinder doesn't turn, replace it

2002 Subaru Outback H6 3.0. I have a misfire on cylinders 1, 3, and 2. I changed, plugs, coils, injectors, aicv, cleaned throttle body, PCV, checked for head gasket leaks, intake and vacuum leaks. ...