...cylinder is not firing at the right time..... all the diagrams are on this ...
...radiator fluid but that has seemed to stop. trying to find a diagram for replacing a headgasket scan to see if you getting a misfire or fuel injector fault.sound like one of cylinder not
which cylinder is the number 2 cylinder? im trying to find out which cylinder is the number 2 cylinder on a 99 kia sportage 2.0 liter engine autozone can tell you with a diagram
diagram for removing a head. i also need the information for the specs on the torque for the head. if anyone could help it would be very well apprieciated. # Properly relieve the fuel system pressure.
...cylinder) Hope helps with this (remember rated this help). Gooc luck. I.need cable firing diagram I have a 1998 kia sportageit has a code of 303 I put new plugs in it but it still running ...
I need to find a diagram of the crankshaft position sensor on the 1996 kia sportage. ITS ON LOWER SIDE ENGINE CYLINDER BLOCK. simply ask kia all information is on there www site.adrian,,,
...diagram of the top of the cylinder head with out the valve cover this is just to give you an idea of the plug location, the valve cover does not need to be removed, you will only remove the cover on ...
The car starts missing, the tack stops working with failure to fire one or two cylinders, any suggestions? you must run the scanner and computer for easy diagnostic. see the diagram attached. God ...
...coil pack firing order on 2006 kia sportage firing order of coil packs Firing order is 1-2-3-4-5-6 Cylinders on the head with the coil pack are 2-4-6 so the other head is 1-3-5 Its difficult to tell ...
Question about 2005 Sportage 2.7
...cylinder instead. If it does, you have the issue resolved. See the diagram below for more details. If you can't read the coil packs on the right, they are paired from top to bottom as 3/6, 2/5, and ...
Usually answered in minutes!
1,074 Questions
1,058 Questions
918 Questions
753 Questions
343 Questions