cylinder replaced,oil chg.plus 2 serpentine belts replaced, and all fluids checked would run $968 +/-?I didn't even know my '91 Subaru Legacy had serpentine belts(thought they were the regular v-belts
...2 4 | --------- Step 1: Lightly oil cylinder bolt threads & washers Step 2: Torque to 22 Ft/Lbs Step 3: Torque to 51 Ft/Lbs Step 4: Loosen all bolts 180 degrees Step 5: Loosen all bolts 180 degrees ...
running on 2 cylinders both front cylinders in front lack spark. problem was intermitent at first but now all the time. I changed the plugs and checked for spark and there was nothing. changed coil ...
where is the #1 cylinder on the subaru legacy 1992 Cylinders are 1-3 on the LEFT side front to back and 2-4 are on the RIGHT side standing at the FRONT of the engine.
hi there jus wondering if u can help me out by tell me how 2 attached the spring from the clutch slave cylinder please yes if you give me the year
...cylinder...#2 : If you have removed the distributor it is installed 180 degrees out...If it's a four cylinder #1 cylinder is the front one...If it's a V6...Facing the front of the engine #1 cylinder ...
...cylinder on the passenger side. The firing order is 1-3-4-2. Cylinders 1 and 3 are on the passenger side, 2 and 4 on the drivers. The plug wires go to the coils just as the cylinders sit; #1 front ...
cylinder 2 and 3 misfire cylinder 2 and 3 are mising you will need to find out why, is it bad spark plug wires or a vacuum leak or injector problems, start by checking the spark plugs and wire first, ...
...angle sensor tabs on the timing gears. Usually, if that's the problem, you will have spark on 2 cylinders and none on the other 2 and none will be fireing at the right
Question about 1994 Legacy Outdoor
cylinder Question edited for clarity. Question moved to model Category Firing order is 1-3-4-2. May 18, 2012 Cyl. 2+4 Misfire. Common? - Second Generation Legacy (1994 More here https://www.google.com
Usually answered in minutes!
447 Questions
411 Questions
381 Questions
317 Questions
328 Questions