Questions & Answers for: Buick where is cylinder 1

...1 cylinder. The #2 on the cap would go to the #6 cylinder, the #3 on the cap would go to the #5 cylinder, the #4 on the cap would go to the #4 cylinder,the #5 on the cap would go to the #3 cylinder, ...

...bank is #1 -#3 & #4 cylinders, with #1 in the front and in that order. The other bank is #2 , #4 and #6 cylinders with #2 in front and in that order. Connect #1 terminal to #1 cylinder and so

...1 cylinder to where piston is up, and on the compression stroke (TDC). Easiest way to do this is with a compression tester on the #1 cylinder - rotor cap OFF. When you see the pressure build...you're ...

...closest to serpentine belt is cylinder 1 and even cylinder closest to serpentine belt is cylinder 2. The cylinders are in numeric order, for example: the cylinder next to cylinder 1 is cylinder

Cylinder or the 3.1L V6; however I have included both below: For the 2.2L L4: Firing Order: 1-3-4-2 Cylinders: .........(back)......... |...1....2....3....4...| ........(front) Coil Connections: (back

1, Cylinder on the 3.1L is closet to the Firewall, on the Left, followed by Cylinder No. 3, then Cylinder No. 5. Then Left to Right, the Front Cylinder Bank, nearest the Bumper starts with Cylinder No

which cyl is cyl #1 on a 2000 3.8 lesabre the rear cylinders are 2 4 6 and the front cylinders are 1 3 5..so the #1 cylinder is the front one on the passengers side.

...1 cylinder should be at TDC on the compression stroke. That is the front cylinder on the drivers side. Lift off cap and see which one it's pointing to and make that #1. It's usually by the ...

...1 cylinder to top dead center, pull the distributer cap and the wire the rotor is pointing to should be your number 1 cylinder. Look at your firing order and whatever is the next cylinder to fire ...

...3.1L ENGINE FIRING ORDER IS 1 2 3 4 5 6 IF YOU HAVE THE 3.3L ENGINE FIRING ORDER IS 1 6 5 4 3 2 STANDING FRONT OF CAR PASSENGER SIDE FROM LEFT TO RIGHT. FRONT CYLINDER IS 1 3 5 BACK CYLINDERS 2 4 ...