Questions & Answers for: cvvt

Ad

Question about 2002 S80

1 Answer

...sounds like the cams are out of sync. There are very specific directions for re-timing the cams and CVVT unit. You will have to take it to a Volvo specialty shop or to the dealer. You might try ...

Ad

Question about 2004 Elantra

1 Answer

2004 huyndai elentra code po 010 failed inspection The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. There is no variation in valve ...

Ad

...can I get a diagram or manual on how to do this? this is very tricky on a volvo because of the cvvt unit if you have never attempted this in a volvo take it to the dealer it may be expxnsive but ...

how to align exhaust cam to gear 2002 volvo s60 2.4 turbo how to align exhaust cam to gear it is a cvvt unit i believ it has to be loaded counter clockwise you should also have the cams locked with ...

I just replaced the cvvt solenoid to correct the P1330 code now how do I get the check engine light to go off Clear the light by re-attaching the scanner and select the 'clear the light' function.

What does a cvvt solenoid to and should it replace it? My "check engine" light is on and the computer says cvvt solenoid/circuit malfunction. Do I need to rush to the dealer, ignore it or what? Not ...

Question about 2004 Elantra

3 Answers

...code P0010 canshaft position actuator circuit How would you begin to fix this problem thank you The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust ...

Question about 1999 S80

1 Answer

Is replacing the Seals and CVVT a part of the timing belt service that is normally done around 105,000 miles? If not and this service is done separately, how much should this run? I had the timing ...

Question about 2007 Accent GS Hatchback

1 Answer

2007 Accent, code P0012, checked CVVT valve OK, wiring to and from PCM OK. Found cvvt oil filter dirty, replaced did not solve problem. I'm thinking the CVVT control gear is bad. The main thing to

how to fix stripped cam cap bolt holes w/ cylinder head in place? '07 hyundai elantra 2.0l cvvt I made the mistake of ordering a rebuilt head online. The head was supposed to be steam cleaned came ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

21887 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...