Questions & Answers for: cv half shaft noise

turns My car makes a horrible noise when I make turns front cv joints need to be replaced. look for a torn rubber boot. this lets dirt into the CV joint. Sometimes these are referred to as half-shafts

...clicking or popping sound coming from the passenger front end? ball joints going out or CV shafts needing changed? Bad CV Half shaft on right hand side.Replace axle shaft assembly to cure

...half shafts have gone bad. make a left and right turn to determine which cv axel is bad sounds like cv axel roll your window down listen to both sides if its not clunk ing and thunking listen to your ...

...half shaft" as a unit which includes 2 new CV joints and boots. Determine which side of the vehicle is making the noise. Realize that the other side may not be far behind in requiring replacement. ...

...CV joint. The cheapest fix is to buy a remanufactured half-shaft for your car.  That is the axle shaft with both CV joints at each end inspected and reconditioned with new grease and CV boots ...

...CV joint- about $70 for a chevy half shaft as an idea of prices. The CV joint could be OK if not contaminated as a result of the boot being torn. It should be checked to verify its condition as part ...

...when turning have the brakes checked in the front. if its a clicking noise only when turning to the right then you may have a bad cv joint on the right half shaft. replace the half shaft

...cv joint gone bad causing the noise only on a turn. if its when turning left then the left cv joint has gone bad. replace the left half shaft. some people say a rattle noise when its a clicking

...only happens on full lock That is the CV joint on the drive shaft or half shaft as it is called with front wheel drive cars . CV = constant velocity joint ...

...rebuilt half shaft cheaper than you can replace one CV joint. If its a front wheel drive it is most likely a outer cv joint bad. They will usually just replace the axle shaft if thats the