Questions & Answers for: crown digital timer

...crown back into its normal position. 5. Reset the digital time and date according to a time zone that is in a one-hour offset from UTC. This is not a perfect solution. Your digital readings will show ...

crown all the way and pull out until it reaches the stop position. Then hold both buttons down until the second hand does a full rotation around the clock face. Now yu can use the top button to adjust

digital timekeeping functionality. To set the time, unscrew the crown counterclockwise and then clockwise to the appropriate time. The digital functionalities are programmed by the buttons on the side

...crown digital timer model number cra8442. I have lost the instructions and cannot remember how to set the time. Can you help? Many thanks Michelle Hi, push and hold the 'yes' button until the day ...

digital display function at 9 o'clock by pulling the crown to the first position. Rotate the crown until the mode hand in the subdial at 6 o'clock is aligned with TME. Press the 2 o'clock button until

...digital display, change the city that displays on the watch, which sets the time to the different time zone. The Citizen also has a calendar, timer, chronograph and LED lights. Since it is an Eco ...

...the secondary digital display on mine, after pressing the crown, CITY would blink, and I would choose the same city and time zone again rather than let the indicator rest on a different one at

CROWN CRA8442 DIGITAL TIMER Start by:- Set day & Time Press Yes till day starts flashing enter what day is now, using up n down V buttons. Then set the current time using same buttons and timer is

crown and set the analog time. However I am also finding it difficult to set the digital time. It seem there is no option, or its not mentioned in the manual press on the light button press for 2 secs

What is A1, A2 referring to on the machine display panel If it is the lower display with the 2 green digits, then that is referring to hours of service since last brush clean cycle. It is just a timer