Questions & Answers for: Ford F-250 cross fire exe

...starter , and solenoid and when I turn the key, I get absolutely nothing, not even a click. So, I cross the solenoid and make it do the work, it starts right up. So, I know it has to be electrical, ...

In need of help i just put on a new distrbutor cap on my ford f-250 and she is back firein please help need this truck for work. Sounds like you have some wires crossed. The parts houses have ...

...which wires need jumped (or grounded) to bypass switch? the problem is the switch, replace it. Cross the wires...from the switch to the motors...since the switch works one way, but not the

...speed increases the miss increases Sounds like a load miss. Chk plug wires for deterioration and or cross firing. Wires should not cross over each other. Worn plugs load wires causing increase spark ...

fuel pump wont work till i cross over relay replaced relay still wont run untill fuel relay is crossed over The relay is turned on by a "pip" signal from the ignition module. Take your module to the ...

have a 1989 f250 5.8 that didnt pass smog the guy told me its running rich the report said the HCdidnt pass just by a few numbers everthing else passed so i put plugs cap wires o2 sensor and a new ...

...AND MAINS BEARINGS 5.4 I hope this helps you. WF Install the main bearing cap bolts and the cross-mounted main bearing cap bolts. Tighten all of the main bearing cap bolts in two stages.

hi i have a 1975 ford f250 with a 390 4 barrel double pumper.my firing order is how it should be a new battery and starter but when i start the engine it slightly turns then stops what can be ...

...fire. this motor has changed back and forth over the years , in the early 70's it was get go machine, later it was only available with a 2 barrel carb and less compression for smog specs, in 88 ...

1990 Ford F250 rough running - Months ago I parked my p/u and went to move it one day, it wouldn't start. It's a manual xmission so we tried pulling it to start it, to no avail. After months ...