Questions & Answers for: Nissan cross fire exe

...It doesn't do this all the time but is getting worse. check for coil lead break down if it has a remote coil next to the radiator. if its a coil in cap job check the rotor for cross fire

stiff steering wheel. is there a universal cross in the assembly? my mechanic said to lube it and should go away. its under the bonet against the fire wall you probly need to do it from underneath

timing or fireing order Timing unless you change the wires and crossed them

change my spark plug and wires now my car is running rough Check to make sure you have not cross the wires and your firing order is off by one wire.  ...

...hard to start whats up Did you make sure you put the wires in the correct fireing order? If you cross one wire it can cause this problem Also make sure you did not install the fuel filter ...

...--------- That is the order the sparks plug are put in on tje 89 I just redid mine today, but don't cross your wires our your firing order will be ...

car back firing plug wires crossed or o2 sensor going bad..have codes read at auto parts store for free to see if o2 sensor pops up

...it will turn over, but not getting fire help!!!!!! Check the fireing order. you may have the wires crossed. (going to the wrong

...fire to injector plug in but not grounding from source outwards to injectors will not start, had fuel pump changed, can hear it pumping, timing sequence is ok, put gas in at station, drove cross ...

...ID plate in the engine compartment on the passenger's side near the fire wall. The VIN on the dash. A VIN on the chassis; passenger side forward of the front wheel on the rail not the cross