...P1336 had the truck for three years, always ran good, have not changed the computer Change your crankshaft position sensor (CPS) P1336 Crankshaft Position System Variation Not ...
p1336 code what is it Hi, The crankshaft position (CKP) system variation learn feature is used to calculate reference period errors caused by slight tolerance variations in the crankshaft, and the CKP
...egr valve you should not have fuel spraying when you turn the key on until the computer senses crankshaft movement.you may have a bad ground or a computer internal problem or maybe a crankshaft ...
...still not start. Do you any ideas? Can't be that both ignition coil are bad, I would first try the crankshaft sensor, sit on the side of the block held on by a 8 or 10mm bolt slide right out, and ...
...engine warms up, you mosl likely need to rebuild your engine or at least repair or replace your crankshaft and crankshaft
...way to time a 4cyl Chevy S-10 timing chain 1998-2003 To Remove: Remove or disconnect the following: Crankshaft pulley and hub Drive belt tensioner Timing chain cover bolts Timing chain cover and ...
where is the crankshaft sensor on the truck chevrolet S10 pick up 2.2 L 4 cilynder? The crankshaft positioner is located on the passenger side of the block near the starter.
...still have same problem around 2500 rpm engine brakes up engine light pop up. please help P0335 - Crankshaft Position Sensor A Circuit Malfunction The crankshaft position sensor (CKP) measures ...
Crankshaft sensor symptoms Where is the crankshaft sensor located on a 1992 s 10 4x4 4.3 liter? The symptom is a no start stall out condition.
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions