I need to replace the chuck on a 1/2 Craftsman impact wrench. Well, for sure you can get a replacement chuck from the hardware store or from the Craftsman dealer.
Craftsman 1/2 inch impact wrench,not working I have a Craftsman 1/2 inch impact wrench, when I pull the trigger all you hear is air escaping but there is no turning of the shaft? Make sure you have at
Question about Mechanics Air Tool Kit Impact Wrench/ratchet
Why doesn't my craftsman air sockets not fit craftsman impact wrench tight?imapact has no pins for sockets to stay on?is there something I need to impact for them to stay on? Make sure the expansion ...
Question about Tools 1/2" Air Impact Wrench High Torque
My brother passed away and i was left his tools. I have a Craftsman Model 875-71229 Air Impact Wrench, but no manual. I do use tools, but as I'm not a mechanic, I was thinking its probably of no use ...
How do you oil a Craftsman Air Impact Wrench Model No. 875191182? Just put 3-5 drops of air tool oil down the air inlet coupler and then run the gun for 5 seconds. Do this everyday that you run the ...
I need a manual for a 1/2 drive impact craftsman wrench you can download this from www.searspartsdirect.com
craftsman 3/4 inch impact wrench Model #875185820 need manual Follow this link to the parts list: http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Craftsman-Parts/Model-875185820
Question about Microtork Torque Wrenches - Model .: 9-44593 Torque Range: 25 250 in./lbs. 1 Drive Size: 3/8"
craftsman instructions I need to know how to set my wrench to 780 inch pounds the wrench only goes to 250 You can not use that model for the torque you require. A larger capacity torque wrench will be
Question about Microtork Torque Wrenches - Model .: 9-44593 Torque Range: 25 250 in./lbs. 1 Drive Size: 3/8"
The ratchet on craftsman microtork torque wrench 44593 does not work 44593 torque wrench ratchet part will not ratchet either way The ratchet pawls have seized and a ratchet rebuild kit is needed.
Question about Microtork Torque Wrenches - Model .: 9-44593 Torque Range: 25 250 in./lbs. 1 Drive Size: 3/8"
replacing broken transmission cooling fan craftsman mower can not remove nut holding fan in place because shaft turns beg borrow or rent an impact wrench place a wrench on nut/bolt and smack it with a
Usually answered in minutes!
317 Questions
162 Questions
122 Questions