Questions & Answers for: Xerox Phaser cover removal

Remove Covers Hi, How do you remove the covers on a Phaser 8500 to do a general maintenance as I have a lot of dry ink clsuters all over and want to get it cleaned out before it creates a problem. ...

...cover removal hi- this may sound dumb but how do i go about removing the side covers to my xerox 8650? 8650 or 8560? If its the 8560 you just take the screw out of the back and lift uprards about the ...

...7700 Error 54 Quick question. To replace the fuser fan motor you need to remove the top printer cover. It looks like this is all one piece. I can find one screw that is above the toner cartridges ...

...this is the number code for the problem 1) the drum heater sensor is dirty. lift top cover & look for the large white plastic part to the left of the stripper guide . The sensor is ...

...it and stop getting blurred images. How do remove it? You don't need to remove it. Remove the right cover, and the fan on that side. Partially remove the clear plastic cover of the encoder and go in ...

...and plugging into the new one/ Thanks Gary it's easy all you do is the following.. remove the top cover remove the rear cover them the right cover then on the top left side of the rear cover there ...

...to change or remove then you can remove the toner cart from your printer by opening the printer cover once the printer cover is open then remove the toner cart.

...tray is empty You will most likely have to remove ( looking at the machine from the front) left cover and clean out some spilled ink from the waste tray sensor. You have to remove one screw from ...

...with a faulty printhead and I'm attempting to replace it, the instructions say to remove the top cover but not more. How do I remove the top cover? I figured out how to remove the side covers to ...

...the main drive assemble gear on a xerox 6360 How to replace the main drive assembly Remove the top cover, remove the right cover, disconnect the cable, remove the 4 screws that hold the main drive