Questions & Answers for: Harley Davidson XLH Sportster 883 cover removal

Question about 1993 XLH Sportster 883

1 Answer

2004 polaris scrambler 500 4wd not engaging removed front hubs and put back together but now does not work. there is power to the magnets but not engaging for some reason. Make sure the magnetic coil ...

Ad

Question about 1993 XLH Sportster 883

1 Answer

Broken Positive Battery Cable on a 2000 Sportster Please describe the best way to remove & replace the + battery cable. What if anything can or needs to be removed so I can get to it ? Remove the ...

Ad

Question about 1993 XLH Sportster 883

2 Answers

...and pull backwards. Once the seat it off, there is a chrome strap across the top of the battery cover. On the right hand side, there is a nut on the end of the strap. Loosen this nut until the ...

Question about 1993 XLH Sportster 883

1 Answer

ive got the cover loose all bolts are out ican get the cover about 1/8 to 1/4 inch away from motor than it wont move Ok, the post that I'm looking at does not tell me which cover you're talking about ...

Question about 1993 XLH Sportster 883

1 Answer

...sounds like push rod but cant get pressure off valve with elect start looks like rocker is hitting cover could that happen if spring is weak sounds more like a lifter is not releasing it's pressure. ...

Question about 1993 XLH Sportster 883

1 Answer

...cover on a 89 sportster First disconnect the battery and drain the primary. Then remove any shifters, footpegs, or anything else that might get it way of the removal process. Look on the very bottom ...

Question about 1993 XLH Sportster 883

1 Answer

...nut below the peg and brake pedal shaft off and the other two bolts that hold the front sprocket cover on. Remove the cover and you can get to the nut. Good Luck ...

Question about 1993 XLH Sportster 883

1 Answer

I pulled off the cam cover and the cam came out how do I remove the cover that has the two rivet looking pieces on the cover that has a 5 on it. What you are talking about is the timer cavity cover ...

Question about 1993 XLH Sportster 883

1 Answer

...nut. Turn the cable adjuster inwards to get as much slack as you can get. Then, remove the derby cover on the primary cover. Take the spring and lock nut out. Turn the clutch adjuster screw as far ...

Question about 1993 XLH Sportster 883

1 Answer

1995 883 harley sportster i would like to know what is involved in removing primary cover?.........please There are a number of allen head bolts you have to remove, unless you are planning on working ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...